Home Construction Dewatering Water Pumps: How They’re Used for Dewatering at Construction Sites

Water Pumps: How They’re Used for Dewatering at Construction Sites

0
Water Pumps: How They’re Used for Dewatering at Construction Sites

When getting rid of excess water at construction sites, the use of a water pump has proven to be highly beneficial. While you may channel the water by digging a trench and using gravity to direct flow, using a pump is frequently the best way to ensure the redistribution process goes as planned.

For example, you can use a sump pump to pump water from ponding water to another location, or you can drill small wells around a work area as well. You can then use a water pump at each point to pull the water out of the dirt and reduce the groundwater at the site. This method of pumping water is used when the water saturates the ground and has not collected in pools on the surface areas.

Dewatering and Water Redistribution on Construction Sites

Federal, state, and local guidelines are used to monitor dewatering processes. When water accumulates at a construction site, it is not supposed to, legally, leave the location, particularly if it contains chemicals or sediments. Water pumps therefore make it possible to remove the water from gravelly or porous soils and direct it to another area of the site where it can settle back into the ground.

Redistribution Options

In some cases, less porous soils, such as clay, may require that any additional water be detained in a pond and redistributed to a wooded site. Steel containment tanks may also be used along with pumping systems to divert excess water from a waterlogged site.

Sometimes, the water volume or problems with redistribution may require pumping water into a storm or sewer line. When this happens, the water is treated before it is directed through the drainage system.

Testing the Water Supply

Before any measure is taken, a geotechnical engineer usually tests the water supply. This test covers the water’s pH and turbidity. This is done first to determine how the water will be contained and/or directed.

Permanent Dewatering Pumps

While dewatering is regularly performed on construction sites, permanent dewatering pumps support buildings that feature basements or underground parking. In these instances, sump pumps are used to excess water from the lower tiers before channeling it into a sewer line.

Plan Ahead: Review Your Water Pump Options Online

Whether dewatering is permanent or temporary in nature, it is important to plan ahead. That is why you need to understand all your can about water pumping systems. Review the pumps today online to find how you can use the devices to fulfill your water dewatering and redistribution needs.

Pumps can fail in floodwater, so you need to make sure the pump(s) you choose are both resilient and capable of meeting your specific pumping needs.

LEAVE A REPLY

Please enter your comment!
Please enter your name here